ORBISPHERE K1100 Комплект LDO сензор, 0-40 ppm, 28 мм арматура за ORBISPHERE, за монтиране на стена

ORBISPHERE K1100 Комплект LDO сензор, 0-40 ppm, 28 мм арматура за ORBISPHERE, за монтиране на стена
Продукт №: K110H-KTO-W-MET
Единична цена Свържете се с нас
Доставка до 2 седмици

Оптична технология елиминира мембраната и електролита, за да минимизира поддръжката

One zero point calibration per year is all that is needed with the K1100 sensor. Designed for minimal drift, luminescent technology makes the K1100 sensor the most stable sensor with the longest calibration interval in the industry.

Бърза реакция и годишно калибриране

With no membranes to replace and no electrolyte solution to replenish, the K1100 requires only two minutes of maintenance per year. Corrosive or hazardous chemicals are not required, making the annual task faster, easier and safer without reducing measurement precision.

Low cost retrofit

The complete system consists of a 410 Controller, a flow chamber, and the K1100 Luminescent Dissolved Oxygen Sensor. The sensor is compatible with Hach Orbisphere 28 mm flow chambers, eliminating the need for engineering changes. Installation is fast and easy and does not require special preparation.

A new level of confidence

The K1100 optical sensor is the first to use luminescent measurement technology to measure both ppb and ppm oxygen levels in power plants. Since 1978, Hach Orbisphere sensors have set the industry standard for oxygen measurement by delivering confidence to every water chemistry manager. The K1100 maintains this tradition and offers significant operating and cost benefits.

Какво има в кутията

Includes 410 wall mount controller, K1100 LDO sensor (high level), 3 m sensor cable, stainless steel flow-chamber with 6 mm fittings

Спецификации

Controller Options: 410 Mono-Channel Controller
Аналогови изходи: 3 Smart 0/4 to 20 mA (500 Ohms) programmable as linear or tri-linear, configurable to send diagnostics or alarm informations.
Време за отговор : (90%) <10 s (gas phase); <50 s (liquid phase)
Възможности за комуникация: 3 x 0/4-20 mA; RS485; Ethernet
Възпроизводимост: ± 0,02 ppm или 3 % в зависимост от това, кое е по-голямо
Гаранция: 24 месеца
Датчик: K1100 LDO
Дисплей, резолюция: 0.1 ppb
Изисквания към захранването (напрежение): 100 - 230 V AC
Измерване, диапазон: 0 - 40 ppm dissolved O₂ (DO)
Какво има в кутията: Includes 410 wall mount controller, K1100 LDO sensor (high level), 3 m sensor cable, stainless steel flow-chamber with 6 mm fittings
Калибриране: Две точки за замяна на капачката (нула и въздух), един по време на употреба (въздух)
Контролер: Wall
Монтаж, вид: 6 mm flow chamber
Най-долна граница на откриваемост: 0.015 ppm
Околна температура: -5 - 50 °C
Параметър: Oxygen
Повторяемост: ± 0.015 ppm или 2 % в зависимост от това, кое е по-голямо
Приложение: Nuclear
Проба, дебит: 50 - 300 mL/min
Проба: налягане: 1 - 20 bar абсолютна (14,5 до 290 psi)
Релета: Measurement board: 3 measurement alarm relays (1A-30 VAC or 0.5A-50 VDC), configurable to send diagnostics information.
Main board: 1 system alarm relay (1A-30 VAC or 0.5A-50 VDC).
Сертификати: 2004/108/EC - EN 61326-1
Тегло, датчик: 0.6 kg
Температура на проба: -5 - 50°C
Температурен диапазон: Accurate from -5 - 50 °C
Resistant - temperature from -5 - 100 °C
Точност: ± 0.02 ppm or 3 % whichever is greater
Условия на съхранение: -5 °C - 100 °C