General Purpose Contacting Conductivity Sensor, PPS Body, Low Conductivity (k=0.5)

General Purpose Contacting Conductivity Sensor, PPS Body, Low Conductivity (k=0.5)
Продукт №: 3433B8A
Единична цена Свържете се с нас
Доставка до 2 седмици

High performance design

These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Simply key in this constant (Hach’s easy DRY-CAL™ method) when configuring the analyzer to ensure the highest possible measuring accuracy. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.

Resistivity and conductivity measurement capability

These enhanced performance sensors measure from 0.057 µS/cm or 18.2 MΩ (theoretically pure water) up to 200,000 µS/cm.

Versatile mounting styles

Non-Metallic General Purpose Sensors have graphite electrodes and ¾-inch male NPT threaded PPS bodies. Mount into a standard ¾-inch pipe tee, 1-½-inch Hach union hardware (for cell constant k=10 sensor only), or fasten onto the end of the pipe.

Full-Featured “Plug and Play” Hach SC Digital Controllers

There are no complicated wiring or set up procedures with any Hach SC controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”

Какво има в кутията

Includes: sensor with 6 m (20 ft) cable and manual

Спецификации

Digital Gateway: None
Вид инсталация: С общо предназначение
Време за отговор Т90: < 30 s
Гаранция: 24 месеца
Датчик, тип: Analog
Диаметър: 32.5 mm
Диапазон на налягането: 6.8 bar at 150 °C (when used with hardware, a lower rated mounting hardware or piping material may
limit the temperature
and pressure ratings)
Дълбочина на потапяне: 114.3 mm pipe mount
  33 mm tee mount
Дължина: 134.6 mm
Дължина на кабела: 6 m
Електрод, материал: Graphite
Измерване, диапазон: 0.001 - 20 MΩ
  0 - 1000 µS/cm
Какво има в кутията: Includes: sensor with 6 m (20 ft) cable and manual
Константа на клетката k: 0.5 cm⁻¹
Повторяемост: ±0.5 % of reading
Поток: 0 - 3 m/s
Работен температурен диапазон: -20 - 200 °C
Разклонителна кутия: Нищо
Разстояние на предаване: 100 m maximum;
1000 m maximum, when used with a termination box
Резба на датчика: ¾" NPT at both ends
Температура, измерване: -20 - 200 °C
Температурен датчик: PT1000 RTD
Точност: ±2 % of reading above 200 µS/cm
Чувствителност: ±0.5 % of reading