Модул SC1000 сонда за 6 сензора, 8 mA НАВЪН, Prognosys, захранващ кабел на ЕС

Модул SC1000 сонда за 6 сензора, 8 mA НАВЪН, Prognosys, захранващ кабел на ЕС
Продукт №: LXV400.99.2G331
Единична цена Свържете се с нас
Доставка до 1 седмица

More confidence in your instrument’s performance

Available exclusively on the SC1000, Prognosys predictive diagnostics uses patented multivariable diagnostic software to read multiple inputs from your instrument and alert you to the instrument's overall performance. An easy-to-read dashboard provides instant indication of measurement reliability and service requirements.

Plug and Play operation

There’s no complicated wiring or set up procedures with the SC1000 controller. Plug any Hach digital sensor into a Probe Module and it’s ready for use. No special ordering or software configuration is needed.

Communication options to fit any application need

The SC1000 controller features state-of-the art Modbus TCP/IP communications protocol for seamless integration into a network of devices that support TCP/IP sockets. Use a standard Ethernet cable or connect wirelessly using GSM/GPRS to communicate with your SCADA, PLC or other network. The SC1000 also offers up to 12 analogue outputs for measured values and up to 12 analog or digital values from non-digital sensors.

Expandable and upgradable

The SC1000 Controller can adapt to your needs. Add or change probes without having to change the controller. Plus, with a single Display Module, additional Probe Modules and associated sensors can be added or removed depending on operational needs. Fully upgradable software ensures that this system will not be obsolete. Hach service plans are available.

Какво има в кутията

SC1000 Probe Module with installed cards (as requested), Basic User Manual, EU Power Cord

Спецификации

Analog Output: Two 4-20 mA Output Modules
Analogue inputs: No Input Module
Conduit for Relay Connection: не
Prognosys: Да
RTC Module: не
Авариен сигнал: Low alarm point, low alarm point deadband, high alarm point, high alarm point deadband, off delay, and on delay
Аналогови изходи: PID, high/low phasing, setpoint, deadband, overfeed timer, off delay, on delay
Входове: Up to 12 analogue 0-20 mA, maximum impedance 500 Ohms per probe module. Additional inputs are available with additional probe modules.
Възможности за комуникация: None
Гаранция: 24 месеца
Датчик: 6
Дисплей, полезна площ: 11.4 x 8.6 cm
Дисплей: течнокристален (фоново осветление): ¼ inch VGA graphical backlit TFT color Glas/Glas-Touch screen, high resistance 320 x 240 pixels
Изход: Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.

Additional analog outputs with additional probe modules. Optional digital communcations via Modbus® (RS485) and Profibus® DP/V1.
  Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.

Additional analog outputs with additional probe modules. Optional digital communcations via Modbus® (RS485) and Profibus® DP/V1.
Какво има в кутията: SC1000 Probe Module with installed cards (as requested), Basic User Manual, EU Power Cord
Комуникация: MODBUS (RS485): Advanced communications/networking with PLC or SCADA system directly from analyzer
PROFIBUS DP/V1 (certified)
GSM/GPRS Quad-band cellular module (FCC and IC approved, EU and US only)
Ethernet service port, RJ45, 10 MB/s
Материал: ABS (display module) and metal (probe module) enclosure with corrosion resistant finish
Монтаж, вид: Повърхност, панел и тръба (хоризонтална и вертикална) с допълнителен слънцезащитен щит
Ограждение, клас: IP65
Опции за захранване: 100-240V AC, EU захранващ кабел
Работен температурен диапазон: -20 - 55 °C / 0 - 95% relative humidity, non-condensing
Размери (В х Ш х Д): 250 мм x 315 mm x 150 мм
Релета: No Relay
Сертификати: European Certifications:
CE per 73/23/EEC and 89/336/EEC
TUV-GS to EN 61010-1
EN 61326 Amd's 1 & 2
Тегло: Approximately 6.5 kg (depending on configuration)
Условия на съхранение: -20 - 70 °C / 0 - 95% relative humidity, non-condensing