EZ Series Phosphate Analysers

Помощ
The EZ Series Online Analysers offer multiple options to monitor Phosphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.

The EZ1000 Series Analysers use colorimetric analysis to measure Phosphate:
- EZ1031 Vanadate yellow method; standard measuring range: 0.1 - 10 mg/L PO₄-P
- EZ1032 Molybdate blue method; standard measuring range: 0.005 - 1 mg/L PO₄-P

Options for EZ1000 analysers include:
- Calibration to 10, 25 or 50% of standard range
- Internal dilution

Options for all analysers include:
- Multiple stream analysis (1-8 streams) reducing cost per sampling point
- Analogue and/or digital outputs for communication

Phosphate can also be measured in combination with Total Phosphorus. For this option please check the EZ7800 Series.

Some applications may require the use of a sampling/filtration or an external dilution system for sample preconditioning. For this option please check the EZ9000 Sample Preconditioning page.

Use the filters in the table below to find your online Phosphate analyser. Need support or a different configuration? Please contact us.
 
 
Сравнение на избраното (0) Изчистване на избраното
артикули на страница 10   |   20   |   50