Contacting Conductivity Sensor, Low Conductivity (k=0.05), with ½" PVDF Compression Fitting

Contacting Conductivity Sensor, Low Conductivity (k=0.05), with ½
Продукт №: 3422A1A
Единична цена Свържете се с нас
Доставка до 2 седмици

High performance design

These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute
four-digit cell constant. Simply key in this constant (Hach’s easy DRY-CAL™ method) when configuring the analyzer to ensure the highest possible measuring accuracy. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.

Resistivity and conductivity measurement capability

These enhanced performance sensors measure from 0.057 µS/cm or 18.2 MΩ (theoretically pure water) up to 200,000 µS/cm.

Versatile mounting styles

Compression Fitting Sensors feature titanium electrodes and a compression fitting for universal installation with up to 102 mm insertion depth. The ½-inch or ¾-inch male NPT compression fitting are offered in PVDF or 316 stainless steel. A longer version of this sensor is available for use with a 316 stainless steel ball valve hardware assembly to insert/retract the sensor form the process without stopping the flow. The longer version can also be used for insertion through a compression fitting. Maximum insertion depth is 178 mm.

Full-Featured “Plug and Play” with Digital Hach SC Controllers

There are no complicated wiring or set up procedures with any Hach SC controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”

Какво има в кутията

Includes: sensor with 6 m (20 ft) cable and manual

Спецификации

Digital Gateway: None
Вид инсталация: Компресия
Време за отговор Т90: 30 s
Гаранция: 24 месеца
Датчик, тип: Analog
Диаметър: 12.7 mm
Диапазон на налягането: 1,7 bar при 150 °C
Дълбочина на потапяне: 155 mm
Дължина: 193.5 mm
Дължина на кабела: 6 m
Електрод, материал: Titanium
Измерване, диапазон: 0.002 - 20 MΩ
  0 - 100 µS/cm
Какво има в кутията: Includes: sensor with 6 m (20 ft) cable and manual
Константа на клетката k: 0.05 cm⁻¹
Материал: Compression Fitting: 1/2" NPT PVDF
Повторяемост: ±0.5 % of reading
Поток: 0 - 3 m/s maximum, fully immersed
Работен температурен диапазон: -20 - 200 °C
Разклонителна кутия: Нищо
Разстояние на предаване: 100 m maximum;
1000 m maximum, when used with a termination box
Резба на датчика: 0,5" NPT
Температура, измерване: -20 - 200 °C
Температурен датчик: PT1000 RTD
Точност: ±2 % of reading above 200 µS/cm
Чувствителност: ±0.5 % of reading